Advanced Valve & Instrument, Inc.
413 B Page Place Road # 1, Statesboro, GA 30458 / PO Box 2853, Statesboro, GA 30459
Phone (912) 764-7028 / Fax (912) 764-5938 / Toll Free 800-284-2293

AUTOMATED VALVES WORKSHEET
 
 
 
Company:
 
Name:
 
Phone Number:
 
E-mail:
 
Contact Information:
 
 
 
Pipe Size:
 
Piping or Body Material:

If other, please list:
 
Pressure:
psig nominal     psig max    Vacuum in/HG
 
Temperature:
F nominal     F max
 
Media:
(if steam, please note if saturated or super heated)
 
Suspended Solids
%
 
Specific Gravity:
 
I prefer the following valve
for this application:
 
This valve will be used in
the following application(s):
Click on application  
  ON/OFF Service or FLOW/PRESSURE CONTROL   **
 
 
 
------- ON/OFF AUTOMATED
  VALVES -------
1.
Which type of actuator do you prefer?
   Pneumatic  Electric
(if Pneumatic continue below, if Electric CLICK HERE and go to question #6 )
 
2.
What is your minimum plant air supply?
  psig
3.
Please select the preferred method of valve action:
4.
Accessories: Please list the accessories you would like added to the valve and where applicable the voltage you require:
Solenoid Yes  No      
 
Voltage  
 
Remote Position Indicator ( i.e. Limit Switches for OPEN and CLOSE indication)
   Yes  No
 
Voltage  
 
Visual Position Indicator ONLY

   Yes  No
5.
Select ELECTRIC ACTUATOR Voltage
6.
Select NEMA Rating:
   4, 4x Weatherproof   Or   7 Explosion Proof
7.
ELECTRIC ACTUATOR ACCESSORIES:
   MECHANICAL BRAKE
   HEATER & THERMOSTAT
   MANUAL OVER-RIDE
   Other...

9.
Will valve be installed in horizontal or vertical piping?
    Horizontal    Or   Vertical
You have completed the ON/OFF Automated Valve Worksheet, Please submit and or print your Worksheet Below!
 
 
-------- FLOW/PRESSURE CONTROL -------
1.   Select your actuator type:    Pneumatic (continue below)   Or  Electric (CLICK HERE and go to question #8)
2.   Select your Positioner:   Pneumatic (3-15 psig)   (If Pneumatic CLICK HERE and go to question #11)
                            Or    Electropneumatic (4-20 mA)   (If Electropneumatic continue below)
3.   Select Nema Standard: Nema 4, 4X (weatherproof)   Or Nema 7/9 (explosion proof/weatherproof)
4.   Do you want to send Position Feedback to your controller?   Yes No
5.   Do you need internal limit switches for Open and Closed Indication?   Yes No
6.   Upon loss of air or control signal, I want this valve to   OPEN    CLOSE    FAIL IN PLACE
7.   Select your preferred method for piping your positioner to your actuator:
8.   ELECTRIC ACTUATOR: Select Control Signal for Electronic Positioner:  : Other...
9.   ACCESSORIES:    Manual Over-ride   Heater & Thermostat   Mechanical Break
10.   Upon loss of Electricity or Control signal, I want this valve to:    OPEN    CLOSE    FAIL IN PLACE
11.   FLOW RATE INFORMATION for VALVE SIZING:
     Nominal or Desired Flow Rate gpm/ #per hour

     Maximum Flow Rate required gpm/ #per hour
   
12.   FLOW RATE INFORMATION for VALVE SIZING: (continued)
     Valve inlet Pressure psig nominal

     Estimated back pressure psig
 
 **
 Will any other medium be used for cleaning this product, i.e. steam, acid etc? Yes No
  If yes, please list media:          Temperature: F max
  Max Pressure  psig or note if under vacuum inches HG
   
  Please list any special service conditions below which we should know, i.e. Oxygen Cleaning, or list any
previous problems with valves in this installation, etc.
 

If you would like to print a copy of this worksheet, please select PRINT THIS PAGE, before pressing the SUBMIT button!

     

 

 

If you would like to print a copy of this worksheet, please select PRINT THIS PAGE, before pressing the SUBMIT button!